Alarm Menu - Prevail-Catv WT-1550-DM Operating Manual

Displayed parameters
Set LaserOutPut Unit
Set Buzzer Alarm
Set RF Control Mode
Set MGC ATT
Set AGC Ref
Set PredATT Mode
Set FiberC Length
Set Channel Number
Set Local IP Address
Set SubNet Mask
Set GateWay
Restore Factory
Set OPT ATT Mode
Set OPT ATT
Set OPT Delta

3.4.4 Alarm Menu

The displayed alarm content
RF Alarm
Laser Temp
Laser Bais
Laser Tec
Output Alarm
+5V Alarm
-5V Alarm
+24V Alarm
WT-1550-DM Intelligent Direct Modulated Optical Transmitter
Comments
Set the unit of output optical
power
Set the buzzer alarm
Set the RF control mode
Set the ATT in MGC mode
Set the deviator in AGC mode
Set the predistortion control
mode
Set the transmission distance in
automatic control mode
Set the channel number
Set the IP address
Set the subnet mask
Set the gateway
Restore factory settings
Set the optical power ATT
mode
Set the optical power
attenuation
Set the difference between the
main optical power and the
inserted optical power
Comment
- 11 -
Remarks
YES is on, NO is off
AGC and MGC two modes selectable
Adjustable range 0~20dB
Adjustable range
Two modes:
Auto is automatic control mode; Manu is
manual control mode.
1km stepping
Without inter-cut function, no this menu
Without inter-cut function, no this menu
Without inter-cut function, no this menu
RF alarm
Laser temperature alarm
Laser bias current alarm
Laser cooling current alarm
Output optical power alarm
+5V alarm
-5V alarm
+24V alarm
dB
±3