Reverse Video And Video Flip; Resetting The Camera To Factory Defaults - Raymarine CAM200IP Installation Instructions Manual

6.3 Reverse video and video flip

The video feed can be reversed (mirror image),
flipped upside down or reversed and flipped
depending on your installation.
1
3
1. Normal view — For forward facing cameras.
2. Mirror / reverse view — For cameras facing aft.
3. Image flip view — For forward facing cameras,
where the camera image appears upside down.
4. Image flip and mirror / reverse view — For
cameras facing aft, where the camera image
appears upside down.
Reversing and flipping the video
In order to reverse the video image or flip the image
follow the steps below.
From the camera's Web-interface:
1. Click the Camera icon on the left hand side of
the page.
2. Click Camera Setup from the quick links.
3. Select the relevant option from the Mirror drop
down box.
The options available are:
• Off — For forward facing cameras.
• Mirror — For cameras facing aft.
• V-flip — For forward facing cameras, where
the camera image appears upside down.
• Rotate — For cameras facing aft, where the
camera image appears upside down.
Operation
2
4
D13136-1
6.4 Resetting the camera to factory
defaults
Follow the steps below to reset your camera's
settings to their factory default values.
• Ensure that the camera and IP camera are
connected to the same network as described in
the Network connection section.
• Ensure that your PC settings have been changed
to allow access to the web interface as described
in the Network setup and operation
Note: The screenshots below are subject to
change.
1. Login to the camera's web interface.
2. Click on the Settings icon
the top right hand corner of the page.
The System Information page is displayed.
3. Click FACTORY DEFAULT from the quick links,
located on the left hand side of the page.
4. Click FACTORY DEFAULTS, located near the
center of the page.
The camera will now reset itself to factory default
settings.
section.
, located in
35