Power Connection - Raymarine CAM200IP Installation Instructions Manual

4.4 Power connection

Self-powered
The unit can be powered from a 12 volt dc power
supply using its dedicated power cable.
Note: The power cable is supplied with a
terminator fitted, this must be removed if the device
is to be self-powered.
1 2
12 v dc +
12 v dc -
4
Item Description
1 Vessel's 12 V dc power
supply
2 Positive terminal
3 Product's power cable
4 Negative terminal
Power over Ethernet
The camera is a Class 2 PoE device. When
the camera is connected directly to a gS Series
multifunction display (MFD) the unit can be powered
from the displays network connection.
NEVER connect the camera's power supply
connection when the unit is being supplied PoE.
1 MFD (providing PoE to the camera)
2 IP camera
3
Waterproof RJ45 ethernet coupler (R32142)
(supplied)
4 Camera's ethernet connection
5 Camera's power cable (Connection not required
as camera is being supplied PoE by the MFD.)
6 RayNet to SeaTalk
24
3
Connects to:
Product's power cable
Power supply —
positive terminal
Vessel's 12 V dc power
supply
Power supply —
negative terminal
1
3 4 5
hs adaptor cable (not supplied)
PoE injector
The camera can also be powered using a PoE
injector.
5
1 MFD
2 IP camera
3 PoE injector (R32141) (not supplied)
4 Camera's ethernet connection
5 RayNet to SeaTalk
6 Camera's power cable (Connection not required
D13088-1
as camera is being supplied PoE by the injector.)
Important: All connections should be made in
a dry area and be suitably insulated to prevent
corrosion and possible product damage due to
water ingress.
Power Over Ethernet (PoE)
PoE is a system which allows electrical power to be
passed from a PSE (Power Sourcing Equipment)
device along the ethernet connection to supply power
to a PD (Powered Device). This allows a single
cable to be used to provide both data connection
and electrical power to compatible devices.
PoE Classifications
PSE devices detect the indicated power range /
classification of connected PDs and allocate the
necessary maximum power based on the PDs
classification
The PoE classifications are as follows:
Current
PoE Class (mA)
Class 0 0 to 4
Class 1 9 to 12
D13089-1
Class 2 17 to 20
Class 3 26 to 30
36 to 44
Class 4
The PSE will always allocate the maximum power
based on the classification of the PD.
1 2
3 4
12 v dc
6
hs adaptor cable (not supplied)
Power range Class
(Watt) description
-
0.44 W to
12.94 W
0.44 W to Very low
3.84 W power
3.84 W to Low power
6.49 W
6.49 W to Mid power
12.95 W
12.95 W to High power
25.5 W
CAM200IP / CAM210IP
D13090-1