Filling With Engine Oil; Operation; Start The Unit; Check Before Use - IKRA Mogatec BRM 1751 SSM TL Operating Instruction

2.7 Filling with engine oil

WARNING! This product is not supplied with
oil. However, for manufacturing reasons it is
possible that a small quantity may be left in
the oil tank (see "Technical specifications")!
1. Unscrew and remove the oil tank cap.
2. Gradually add good-quality engine oil (SAE 10W-30,
ca. 0,6 l). Allow the oil to settle.
3. Check the oil level frequently while filling. Wipe the
oil dipstick clean; refit and tighten the filler cap and
then remove it again. The oil level must be within the
min / max markings. Add more oil if necessary. Do not
overfill (Fig. 15).
Fig. 15
4. Wipe spilled oil with a soft cloth and reattach the oil
tank cap.

3. OPERATION

3.1 Start the unit

Do not start the machine until it has been completely
assembled. Before switching on the machine, always
checking the oil.

3.2 Check before use!

Danger of injury!
Do not operate the device unless you did not
find any faults. If a part has become defective,
make sure to replace it before you use the de-
vice again.
Check the safe condition of the device:
- Check the machine for leaks.
- Check the machine for visual defects.
- Check that all parts of the machine have been se-
curely fitted.
- Check that all safety machine are in proper condition.
- Slide the throttle lever to and fro several times to en-
sure that it is moving smoothly and correctly.
Danger of injury!
Before starting work, always check the ground
and remove all objects which could be thrown by
the device.
GB | Operating Instruction

3.3 Mowing

1. Prepare the product according to required applica-
Function
Grass coll-
ection
Mulching
Side
discharging
Max.
2. Make sure that the lawn is clear of stones, sticks, wire
3. Do not cut wet grass because it tends to stick to the
Min.
4. Never cut off more than one-third of the total length
5. Slowly push the product forward. You may want to
6. Mow in slight overlapping rows. The most effective
Fig. 16
10
WARNING: The cutting blade turns when the
engine is being started.
tion.
Grass
catcher
Attached
Removed
Removed
or other objects that could damage the product or its
engine.
underbody of the machine, preventing the proper dis-
charge of grass clippings, and it could also cause you
to slip and fall.
of the grass for a healthy lawn. In the autumn, lawns
should only be cut as long as there is growth.
use the self- propelled function for assistance.
pattern for mowing lawns is straight lines along one of
the sides. This will keep the rows even and ensures
that all the lawn is cut without missing any spots (Fig.
16).
Mulching Side
insert discharge
attachment
Removed Removed
Inserted Removed
Inserted Attached