Display Explanations - HoMedics BPA-150 User Manual

DISPLAY EXPLANATIONS

Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9
Display Symbols:
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Irregular Heartbeat Detector: Indicates an irregular heartbeat
was detected. See page 22 for more information.
Memory Average: Displays average of last 3 readings.
Risk Category Indicator: Compares readings against blood
pressure guidelines. See page 21 for more information.
START
STOP
(No Symbol)
START
STOP
If any of the following letters and numbers appear in the area that
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Switch the unit off to
clear, then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended.
See page 26 for information.
10