Top Case; Front Panel; Digital P.c.b - Panasonic DMR-ES10EB Service Manual

10.3. Top Case

1. Remove the 2 screws (A) and 3 screws (B).
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.

10.4. Front Panel

1. Unlock 2 tabs (A) and 3 tabs (B) in this order to remove
Front Panel.
(The tab (A) and (B) should be unlocked at the same time,
respectively.)
DMR-ES10EB / DMR-ES1 0EC / DMR-ES1 0EG / DMR-ES1 0EP / DMR-ES10EBL

10.5. Digital P.C.B.

1. Remove FFC and a Screw (A).
2. Lift up Digital P.C.B. slightly so to disconnect Connector to
remove Digital P.C.B.
CAUTION 1:
When replacing Digital P.C.B., pay attention as below.