Advertisement
REMOTE CONTRO1
Remote Cord MC-4
The motor drive can also be triggered by connecting the
Remote Cord MC-4 to its remote terminal. The shutter
will be released by contact between the two ends of the
remote cord. An extension cable can also be connected;
any length is acceptable, so long as the circuit resistance
does not exceed 100 ohms.
lntervalometer MT-l
This timing control device enables various special-effects
photographic techniques such as time-lapse, work-sampl-
ing, time-exposure and delayed-exposure. lts output
socket should be connected to the remote terminal on
the motor drive via the Extension Cord MC-5.
Advertisement
