H3C S5510 Series Installation Manual page 49

Installation Manual
H3C S5510 Series Ethernet Switches
The appearance of "Please press ENTER" indicates that the switch has completed its
automatic boot.
Press <Enter>; the system displays:
<H3C>
You can configure the switch now.
Note:
A wide range of command views are available for H3C Series Switches. For more
information on configuration commands and command line interfaces, refer to H3C
S3610&S5510 Series Ethernet Switches Operation Manual and H3C S3610&S5510
Series Ethernet Switches Command Manual.
Chapter 4 Starting up the Switch at the Initial Boot
4-6