Change Voice Message Indicator Setting Per Line; Change Audible Voice Message Indicator Setting Per Line; Speed Dial Buttons And Codes; Set Up Speed Dial Buttons - Cisco 6901 User Manual
For cisco unified communications manager 9.0
Hide thumbs
Also See for 6901:
- Administration manual (156 pages) ,
- User manual (62 pages) ,
- User giude (54 pages)
Table of Contents
Advertisement
User Options
Change Voice Message Indicator Setting Per Line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
(Optional) If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
Step 5
In the Message Waiting Lamp area, choose from various settings.
Typically, the default message waiting setting prompts your phone to display a steady red light from the
handset light strip to indicate a new voice message.
Step 6
Select Save.
Change Audible Voice Message Indicator Setting Per Line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Audible Message Waiting Lamp area, choose the desired setting.
Step 6
Select Save.
Speed Dial Buttons and Codes
This procedure applies to the Cisco Unified IP Phone 6911 only.
Depending on how your phone has been set up, you can use speed dial buttons and speed dial codes, which
you can set up on your User Options Web pages.
Set Up Speed Dial Buttons
This procedure applies to the Cisco Unified IP Phone 6911 only.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Speed Dial Buttons and Codes
31
Advertisement
Table of Contents
Troubleshooting
