Speed Dial; Place Call With Speed Dial; Transfer - Cisco 6901 User Manual

Calling Features
• If you answer the call:
• If you put the call on hold:
Related Topics
Answer Call Using Pickup, on page 18
Answer Call Using Group Pickup, on page 18

Speed Dial

This procedure applies to the Cisco Unified IP Phone 6911 only.
Speed Dial allows you to press a button and enter a preconfigured code to place a call. Before you can use
Speed Dial on your phone, you must set up Speed Dial on your User Options Web pages.
Depending on the setup, your phone can support this Speed Dial feature:
• Feature Button—Allows you to quickly dial a phone number if the button and a code is set up for speed

Place Call with Speed Dial

This procedure applies to the Cisco Unified IP Phone 6911 only.
Before You Begin
Before you can use speed dial buttons on your phone, you must set up speed dial on your User Options web
pages.
Procedure
To place a call, press the Feature button enabled for speed dial.

Transfer

Transfer allows you to redirect a connected call from your phone to another number.
◦ Your Line button turns green.
◦ Your coworker's Line button turns red.
When button is red, and if auto barge is enabled, you can auto barge a call by going off hook or
make a new call, if auto barge is disabled.
◦ Your Line button flashes green
◦ Your coworker's Line button flashes red.
When the Line button flashes red, your coworker can pick up the call.
dialing.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

Speed Dial

25