Table of Contents
Advertisement
TO START
NO'/.'
AND
STOP
LATER:
1 Push CQOK TiME butron
2 Set lengtn 01 bakrng time wllh SET knob.
3. Push BAKE buttor
4 Set desrred temperature
wrth SET button
5 When COOK TIME IS reached, the end 01 cycle tone WIII sound and
Ihe oven WIII turn off
Note: You can push the STOP TIML button to find out when the end
of cycle will sound and the oven WIII turn off.
TO START LATER AND STOP LATER:
1. Push COOK TIME button.
2. Set length of bakrng trme wrth SET knob
3. Push STOP TIME button.
4 Set trme of day when bakrng should be completed
with SET knob.
c
5 Push BAKE button.
?
6. Set desired temperature
wtth SET knob.
0
7. When STOP TIME IS reached, the end of cycle tone WIII sound and the
oven WIII turn off.
5
Note: You can push the STOP TIME button to ftnd out when the oven
:
WIII turn off. Push and hold the COOK TIME button to find out when the
oven wtll turn on.
!
When a lunctton has been entered, you can recall what has been pro-
3
grammed by pushing the corresponding
functton button. The messages
In the display show you whtch function IS currently betng displayed. Whtle
s
the function IS dtsplayed, you can change It wtth the SET knob. You can
change any programmed
function at any ttme.
3
Never slide the door IocWunlock handle into the LOCK posrtron whrle try-
tng to bake or brotl. You will not be able lo program your oven to bake
or broil if the oven door IS locked. If you try to lock the door whtle the oven
IS on, the oven will tmmedlately turn off
6
TONES
End of Cycle Tone (3 long beeps one second on, one second on)- sho'ws
that a trmed oven operation has reached STOP TIME or that the Timer
has counted down.
Attention Tone (serves of short beeps, one quarter second on. one quarter
second off. until proper response IS grven): WIII sound If oven has onty
been parttally programmed.
For example, 11 you have selected a COOK
TIME btt no temperature,
you WIII hear the attention tone unftl you select
a temperature
or push OVEN CANCEL.
Notification
Tone (single. one second beep). shows that the oven has
stabtltzed at the selected temperature.
Key-tone (single. one tenth second beep). sounds when any button IS
pushed.
Failure Tone (series of very rapid beeps one erghth second on, one quarter
second off): display will show FO-FE. Cancel fatlure tone by pushtng the
OVEN CANCEL button. If the failure occured whtle you were programm-
ing the Electric Range Control, push the OVEN CANCEL button and try
agatn. If you still get a farlure tone that does not stop after 16 seconds,
call for servtce. If you are unable to cancel the fatlure tone wrth the OVEN
CANCEL
button. unplug the range or dtsconnecl
the ctrcutt breaker.
If you prefer that your range not have an audtble tone at the end of a cycle
or when you push a button (Key Tone), you can eliminate the End of Cy-
cle and Key Tone by pushing and holding the OVEN CANCEL button IJ~
111 you hear a short beep (in approxtmately
two seconds). If you wtsh to
activate the tones again. push and hold the OVEN CANCEL button or-kce
more until you hear a short beep. Cancelling or actrvattng the tones should
only be done when there is no oven operatton programmed.
Pushtng the
OVEN CANCEL button wtll clear all functions except the clock and Timer
Advertisement
Table of Contents
