Roper B9907X0 Use And Care Manual page 16

OVEN/BROILER ELEMENT DOES NOT WORK
m
l
speck
for cower '&rage Chxk lor blown fuse or tripped clrcull breaker
l
Are cormols set correclly? See pages 5
dnd 6
RANGE IS BEEPING
d
l
See Ihe secllon on Tones. page 6
BROILING PROBLEMS
.
Oven Control knob not set to BROIL. See pages 5 and 6.
l
Usmg wrong rack position. See chart on page 9.
l
Alummum 1011 not used properly and grease can't dram correctly
See page 8.
OVEN DOOR WILL NOT UNLOCK AFTER CLEANING
l
The door WIII not unlock untrl the oven has cooled to a safe temperature.
See page 11 lor rnstructlons on unlcckrng the door.
OVEN WILL NOT SELF-CLEAN
l
Oven controls not set properly. Review step by step instructions on
page 11.
l
Heavy spillovers were not wiped up before starting clean cycle. See
page 10.
l
Oven too dirty - should be cleaned more often.
16
ADJUSTING OVEN TEMPERATURE
The temperature In your new range has been set correctly at the Iactor\
so be sure lo follow the recrpe lemperatures and flmes the 11rs1 few tlmec
you bake In your new oven.
II you lhlnk the oven should be hotter or cooler, you can adlust II yourself
To deade how much to change the temperature, set the oven temperature
2YF hrgher'or lower than the temperature rn your recipe. then bake. The
results of thts "test" should grve you an Idea 01 how muchThe temperature
should be changed,
To adjust temperature:
1.
2.
3.
4.
5.
Push the BAKE button.
Select a temperature between 5OCPF and 55PF with the SET knob.
Quickly (within two seconds, before the BAKE function energizes1
push and hold the BAKE button.
The display will go blank and then WIII show the amount of degrees
difference between the onginal factory temperature setting and the
current temperature setting. If the oven temperature has never been
adjusted the display wrll read 00.
The temperature can be adjusted up to 35OF hotter or 3YF cooler
in 5OF steps. A minus sign (-) before the number means that the
oven will be cooler by displayed amount of degrees.
When you have made the desired adjustment, push the CLOCK
button to go back to the time of day display or use your oven as
you would normally.
Note: The self-clean temperature will not change by the adjustment
described above.