Fuses - Hyundai Creta 2016 Owner's Manual

FuSES

■ Blade type
B l o
B l o
Normal
■ Slow Blow type
Normal
■ Multi fuse
B B l l o o w w
Normal
A vehicle's electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 fuse panels, one
located in the driver's side panel bol-
w n
w n
ster, the other in the engine compart-
ment near the battery.
If any of your vehicle's lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
B B l l o o w w n n
has blown, the element inside the
fuse will be melted.
If the electrical system does not
work, first check the driver's side
fuse panel.
Before replacing a blown fuse, dis-
connect the negative battery cable.
n n
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
OTA070039
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult
HYUNDAI dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, Slow
Blow type and multi fuse for higher
amperage ratings.
Fuse replacement
•
Never replace a fuse with any-
thing but another fuse of the
same rating.
•
A higher capacity fuse could
cause damage and possibly a
fire.
•
Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It
may cause extensive wiring
damage and a possible fire.
NOTICE
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
an authorized
Information
The actual fuse/relay panel label may
differ from equipped items.
WARNING
7-63
7