Subaru IMPREZA 2004 Service Manual page 17

LUBRICATION
4) Tighten the bolts which install the oil pan onto
engine block.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
5) Lower the engine onto front crossmember.
6) Tighten the nuts which install the front cushion
rubber onto front crossmember.
Tightening torque:
83 N·m (8.5 kgf-m, 61 ft-lb)
7) Install the under cover.
8) Lower the vehicle.
CAUTION:
When lowering the vehicle, lower the lifting de-
vice and wire rope together.
9) Remove the lifting device and steel cables.
Oil Pan and Strainer
10) Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N·m (5.9 kgf-m, 42.8 ft-lb)
LU-00031
11) Install the radiator upper brackets.
12) Install the intercooler. <Ref. to IN(H4DOTC)-
10, INSTALLATION, Intercooler.>
13) Install the air intake boot and air cleaner upper
cover.
LU-00030
14) Connect the connector to mass air flow sensor.
LU-00028
LU(H4DOTC)-16
T2 T1
ME-00218
LU-00027
LU-00070
LU-00026