Subaru IMPREZA 2004 Service Manual page 10

Recommended oil
API classification SL, SJ with the "Energy
Conserving" logo is printed, or SH (if you
cannot obtain the oil with SL, SJ or SH
grades, you may use SG grade "ENERGY
CONSERVING" oil.)
ACEA specification, A1, A2 or A3
CCMC specification, G4 or G5
New API certification mark (Star burst mark)
label is on the container.
Engine oil capacity:
Upper level
4.0 2 (4.2 US qt, 3.5 Imp qt)
Lower level
3.0 2 (3.2 US qt, 2.6 Imp qt)
SAE (1)
( C) -30 -20 -15
( F) -22 -4 5
5W-30 (2)
(1) SAE Viscosity No. and Applicable Temperature
(2) PREFERRED
The proper viscosity helps vehicle get good cold
and hot starting by reducing viscous friction and
thus increasing cranking speed.
CAUTION:
When replenishing oil, it does not matter if the
oil to be added is a different brand from that in
the engine; however, use oil having the API
classification and SAE viscosity No. designat-
ed by SUBARU.
NOTE:
If the vehicle is used in areas with very high temper-
atures or for other heavy duty applications, the fol-
lowing viscosity oils
classification: SL or SJ or SH
SAE Viscosity No.: 30, 40, 10W-50, 20W-40, 20W-
50.
8) Close the engine oil filler cap.
9) Start the engine and warm it up for a time.
0 15 30 40
32 59 86 104
10W-30,10W-40
LU-00076
may be used:
LU(H4DOTC)-9
Engine Oil
10) After the engine stops, recheck the oil level. If
necessary, add engine oil up to the upper level on
level gauge.
(A)
(A) Oil level gauge
(B) Engine oil filler cap
(C) Upper level
(D) Lower level
(E) Approx. 1.0 2 (1.1 US qt, 0.9 lmp qt)
API
LUBRICATION
(B)
(E)
LU-00138
(C)
(D)