Keyboard & Ps/2 Mouse Connector (Cn6); Usb Port Connector Cn5; Irda Infrared Interface Port (Cn11); Vga Connector (Cn4) - Vox WAFER-5820 User Manual

3.6 Keyboard & PS/2 Mouse Connector (CN6)
A 6-pin mini DIN connector (CN6) is located on the mounting
bracket for easy connection to a keyboard or PS/2 mouse. The
card comes with a cable to convert from the 6-pin mini-DIN
connector to two 6-pin mini-DIN connector for keyboard and
mouse connection
•
CN6: 6-pin Mini-DIN Keyboard & Mouse Connector
PIN NO. DESCRIPTION
1 KEYBOARD DATA
2 MOUSE DATA
3 GROUND
4 +5V
5 KEYBOARD CLOCK
6 MOUSE CLOCK

3.7 USB Port Connector CN5

The WAFER-5820 provides two USB interfaces, which gives
the completed plug and play, for up to 127 external devices.
•
CN5: Internal USB Connector
1. USBVCC1
3. D1F+
5. USBVCC2
7. D2F+
9. GND

3.8 IrDA Infrared Interface Port (CN11)

The WAFER-5820 built-in a IrDA port which support Serial
Infrared (SIR) or Amplitude Shift Keyed IR(ASKIR) interface.
When use the IrDA port have to set SIR or ASKIR model in the
BIOS's Peripheral Setup's COM2. Then the normal RS -232
COM2 will be disabled.
2. D1F-
4. GND
6. D2F-
8. GND
10. GND
17
•
CN11: IrDA connector
PIN NO. DESCRIPTION
1 VCC
2 FIRRX
3 IRRX
4 Ground
5 IR-TX
6 CIR

3.9 VGA Connector (CN4)

The WAFER-5820 built-in 15-pin VGA connector accepts the
CRT monitor.
•
CN4: 15-pin Female Connector
1 RED
3 BLUE
5 GROUND
7 GROUND
9 NC
11 NC
13 HSYNC
15 DDCCLK

3.10 LCD/LVDS Interface Connector

The WAFER-5820 provides a 2x22-pin connector for the LCD
flat panel interface and a 2x10-pin connector for the LVDS flat
panel interface.
The Wafer 5820 comes to support TFT LCD panels at
following display options : (This is a reference table only , may
support more type panels)
Video Display type Resolution
TFT VGA 640X480 , 64K Color , 18bits Toshiba LTM10C209A
TFT SVGA 800X600 , 64K Color , 18bits Toshiba LTM12C275A
2 GREEN
4 NC
6 GROUND
8 GROUND
10 GROUND
12 DDC DAT
14 VSYNC
Example
18