Getting Start; Standard Cmos Setup; Wafer - Vox WAFER-5820 User Manual

4
AWARD BIOS Setup
WAFER-5820 uses the AWARD PCI/ISA BIOS for system
configuration. The AWARD BIOS setup program is designed to
provide maximum flexibility in configuring the system by offering
various options which may be selected to meet end-user
requirements. This chapter is written to assist you in the proper
usage of these features.

4.1 Getting Start

When you turn on the power button, the BIOS will enter the
Power-On-Self-Test routines. These routines will be executed for
system test and initialization and system configuration verification.
After the POST routines are completed, the following message
appears :
" Hit DEL if you want to run SETUP"
To access AWARD BIOS SETUP UTILITY, press <Del> key.
The following screen will be displayed at this time:
25

4.2 Standard CMOS Setup

The Standard CMOS Setup is used for basic hardware system
configuration. The main function is for Date/Time setting and
Floppy/Hard Disk Drive setting. Please refer the following
screen for this setup.
To set the Date, for example, press either the arrow or <Enter> button on
your keyboard to select one of the fields (Month, Date or Year) then press
either <PgUp> or <PgDn> to increase or decrease the value of that field. Do
the same steps for Time setting.
For IDE hard disk drive setup, please check the following possible setup
procedure:
1. Use the Auto setting for detection during boot-up.
2. Use the IDE HDD AUTO DETECTION in the main menu,
the computer will
specifications.
automatically detect the
26
HDD