Svga Setup; Introduction; Further Information; Ground - Vox WAFER-5820 User Manual

5

SVGA Setup

5.1 Introduction

The WAFER-5820 is equipped with on-board LCD/VGA
interface. The description below is its specifications and features:
5.1.1 Chipset
The WAFER-5820 uses a Cyrix CX5530 chipset as its
SVGA controller. It is compatible with many common 18-bit
LCD displays and traditional analog CRT monitors. The VGA
BIOS supports LCD. Besides, it also accepts interlaced and
non-interlaced analog monitors (color and monochrome
VGA) with high-resolution quality while maintaining complete
IBM VGA compatibility. But digital monitors (i.e. MDA, CGA,
and EGA) can be NOT supported. Multiple frequency
(multisync) monitors are operated as if they were analog
monitors.
5.1.2 Display memory
Having 1.5 ~ 4 MB UMA memory, the VGA controller can
make CRT displays or color panel displays perform with
resolutions up to 1024 x 768 at 64 K colors. The display
memory can be modified up to 4 MB in BIOS for true-color
resolution of 1024 x 768.
37
5.1.3 Display drivers
1. Win95,98 drivers(VGA & Audio) in
Wafer-5820CD \ Geodevga95,98 \ National geode Win9x
Drivers1.2.exe
2. WinNT4.0 drivers in
Wafer-5820CD\Nt40Vga\

5.2 Further Information

For more detailed information about the PCI/SVGA installation
in your WAFER-5820, including driver updates, troubleshooting
instructions, please refer to the following webs which provide some
resources you may need. If not find the information you need,
please contact with your local distributer.
38