Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Flying Gadgets T41
Summary of Contents for Flying Gadgets T41
- Page 2 Thank you for purchasing this product. Please read this manual carefully before use and retain it for your future reference. Technical parameter of the helicopter Fuselage Length:435MM Gross Weight: about 415g Overall height: 180MM Main Rotor Diameter: 340MM Motor: #370 Tail Rotor Diameter: 70MM Gear Ratio: 14:1 Battery: Li-polymer 3.7V 1000mAh...
- Page 3 Major parts Camera/ Charging plug Photograph switch Camera Helicopter The port of the charger Charger Charging the helicopter Turn off the helicopter; Unplug the battery cable from the helicopter,then,insert the plug of the battery cable into the port of the charge (matching the plug to the port) to start charging. Once charging is proceeding,red power light of the charge controller is on.When charging is finished,the red light will turn into green light.
- Page 4 OPERATIONAL TIPS 1.User may push either of the control sticks to skip the auto signal connection process once the helicopter finished signal connection. 2.Set the connection one by one. Otherwise, it may not be connected. 3.Once the transmitter is turned off, the connection procedure must be repeated to operate the helicopter.
- Page 5 Hints If the helicopter keeps self-rotating in the air even there is no control signal given, you could correct it by adjusting the trimmer of gyro on the remote control. Videography and Photography Function 1. Insert the TF memory card into the videography module of the helicopter and turn on the helicopter by push the power switch.
- Page 6 Circuit protection devices 1.When the battery voltage of the helicopter drops to certain level , the helicopter will be out of control. Recharge is necessary to resume the function. 2.To protect the helicopter and prevent any risks caused by the stuck of the main rotor, the main rotor will stop rotating when it is stuck.
Need help?
Do you have a question about the T41 and is the answer not in the manual?
Questions and answers