Peavey JSX JSX Mini Colossal Operating Manual page 8

Front Panel
1
INPUT
1
This 1/4" jack is designed to accommodate signals from any standard electric guitar.
VOLUME
2
This control sets the overall volume and preamp drive level of the amp. For best results, set this control
to the maximum desired amount of preamp distortion and use the volume knob on your guitar to achieve
cleaner tones.
TONE
3
This control sets the overall frequency response of the preamp. Rotate this control counterclockwise for
darker sounds and clockwise for brighter sounds.
EFFECTS SEND
4
This buffered output provides a low-level signal to external effects processors. The Effects Loop is out of
the signal path when it is not being used.
EFFECTS RETURN
5
This input provides a low-level signal return from external effects processors.
SPEED
6
This control sets the rate at which the Tremolo circuit modulates the signal.
DEPTH
7
This control sets the intensity with which the Tremolo affects the signal.
POWER STATUS LAMP
8
This indicator illuminates when mains power is being supplied to the amp.
POWER SWITCH
9
This heavy-duty two-way toggle switch applies mains power to the unit. The red POWER STATUS LAMP
(8) will illuminate when this switch is in the ON position.
CAUTION: The on/off switch in this unit does not break both sides of the primary mains. Hazardous en-
ergy can be present inside the chassis when the on/off switch is in the OFF position.
2 3 4 5 6
8
9
7
8