EGO SNT2100 Operator's Manual page 27

2. Turn the snow blower on its side
(Fig. 24).
3. To reduce the risk of injury, wear
gloves. Use a T20 Torx screwdriver
(not included) to remove the 5 Torx
screws (Fig. 24). Detach the worn
scraper bar from the snow blower
(Fig. 25).
4. Install the new scraper bar and
fasten it securely to the snow
blower with the 5 Torx screws
(Fig. 24).
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100
24
Torx screw
Scraper Bar
25
27