1. Manuals
  2. Brands
  3. TBK vision Manuals
  4. DVR
  5. 7000 SERIES
  6. User manual

TBK vision 7000 SERIES User Manual

Embedded dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Embedded DVR
USER'S MANUAL
Thank You
Thank you for purchasing our Digital Video Recorder.
Before operating the system, please read this User's Manual thoroughly and
retain it for future reference.
050905
060829
Revision Date : 2007. 2. 12

Firmware Version :

Ex-Factory Date :
※ Picture might differ according to the specifications
061001
061201
Stand Alone Type
DVR
SYSTEM
070212

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7000 SERIES and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TBK vision 7000 SERIES

Summary of Contents for TBK vision 7000 SERIES

  • Page 1: Firmware Version

    Stand Alone Type SYSTEM Embedded DVR USER’S MANUAL Thank You Thank you for purchasing our Digital Video Recorder. Before operating the system, please read this User’s Manual thoroughly and retain it for future reference. Revision Date : 2007. 2. 12 Firmware Version : Ex-Factory Date : ※...
  • Page 2 WARNING TO REDUCE FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. This installation should be made by a qualified service person and should conform to all local codes.

  • Page 3: Important Safeguards

    Cautions Read Before System Operation Follow these details to prevent material damage or personal injury. Signs of Caution and Warning Warning: This sign indicates that the user could die or be seriously wounded if not used or installed properly. Caution: This sign indicates that the user could be wounded or could expect property damage if not used or installed properly.
  • Page 4 Caution 1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates at high speed and may cause an accident. 2. Do not drop, give strong vibration, or shock to the product. It may cause malfunction. 3.

  • Page 5: Table Of Contents

    • INDEX • CHAPTER 1. Specification & System organization 1. Specification -------------------------------------------------------------- 4 2 . P r o d u c t C o n t e n t s L i s t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 3 .
  • Page 6 • INDEX • CHAPTER 6. MENU ⊙ G o t o M e n u - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 6 ⊙...

  • Page 7: Specification

    1. Specification & Organization 1. Specification Video standard PAL/NTSC Audio 2-way Audio conference Monitor display Real time:25 Fps (PAL), 30Fps(NTSC) per camera Covert camera operation Programmable Event/Log search Up to 1,000,000 for user login/out, configuration changes, remote access, connects/disconnects Record Scheduling Daily, Weekly adjustable specific hour per channel Remote Access TCP/IP, View, Search, Recording &...
  • Page 8 1. Specification & Organization Network Speed Control 8 levels Pre-alarm recording Up to 5 sec., programmable per camera OSD languages English, Spanish, Chinese, Russian, Slovak, Hungarian, Turkish, German, French (Subject to Firmware version) Ethernet interface 10/100-Base-TX, RJ-45 Remote Function Live View, Live Recording, Search, Set-up, Back-up PTZ Control RS-485 interface Supply voltage...

  • Page 9: 2. Product Contents List

    1. Specification & Organization 2. Product contents List Please confirm the contents when open package. ① Basic Contents DVR Unit 12V Adaptor Power Cable (TBK-7004SA LX only) Remote Controller User Manual & AAA Battery X 2 Remote Software CD ② Option Contents CD-RW USB MOMORY...

  • Page 10: 3. System Organization

    1. Specification & Organization 3. System Organization Alarm Sensor #1-4 Relay Out Remote Client PC Image Printer Camera #1-4 Alarm Input/Out NETWORK AVI Backup TCP/IP Video In WEB Client Backup Video Out Remote Controller CD-RW AV Monitor Monitor...

  • Page 11: Chapter 2. Description

    2. Description 1.1 Front Panel (4channel model) ③ ② ⑥ ⑨ ⑪ ⑩ ① ④ ⑤ ⑦ ⑧ ⑬ ⑫ ① Jog Shuttle : Playback in different fast forward/backward speed, or frame by frame ② Remote Controller Sensor Input. ③ CD-RW : CD-RW Device for Backup. ④...
  • Page 12 2. Description 1.2 Front Panel (8channel & 16channel models) ⑦ ④ ⑥ ⑪ ⑫ ① ③ ② ⑬ ⑤ ⑭ ⑧ ⑨ ⑩ ① Jog Shuttle : Playback in different fast forward/backward speed, or frame by frame ② Channel Selection Button : Select Channel or Input Password. Remote Controller Sensor Input.

  • Page 13: R E A R P A N E

    2. Description 2.1 Rear Panel (4channel model) ① ③ ⑥ ⑪ ⑨ ⑦ ④ ⑤ ⑧ ⑩ ⑬ ⑫ ② ① Video In : BNC Port for Camera Input. (4 Camera Connectable) ② Loop Back : Camera Loop Out. (4 BNC Port) ③...
  • Page 14 2. Description 2.2 Rear Panel (8channel & 16channel models) ① ③ ⑦ ⑧ ⑬ ⑭ ⑩ ⑥ ⑨ ⑪ ④ ⑤ ⑫ ② ① Video In : BNC Port for Camera Input. ② Loop Back : Camera Loop Out. 1-8 channel and 9-16 channel options. ③...

  • Page 15: R E M O T E C O N T R O L L E

    2. Description 3. Remote Controller POWER MENU: Open Menu System ON/OFF Channel Selection Button (4ch Available, #1~4 Button) RETURN ENTER: Apply Setup Change Cancel Setup or Return to Search Controller : Control Playback Option, Previous Menu Movement, PTZ/Focus Control Change Screen Open PTZ/IRIS Mode Mode...

  • Page 16: Chapter 3. Installation

    3. Installation 1. Hard Disk Installation ① Jumper Setup as Master or Slave • Jumper Setup as master or Slave, Following the Instruction shown on Hard Disk. • Jumper located next to Hard Disk’s data cable or rear side of Hard Disk. •...
  • Page 17 3. Installation ② After set jumper, attach Hard Disk with Screw & Bracket HDD Bracket (Max. for 2 HDD) ③ Connect IDE Cable to Hard Disk • Connect Power Cable to Hard Disk ※ If One HDD is installed, connect it to the End of Connector (Black color) If Add 1 more HDD, connect it to the Middle Connector (Gray color)

  • Page 18: C D - R W & H A R D D I S K I N S T A L L A T I O

    3. Installation 1. CD-RW & Hard Disk Installation ① Jumper Setup as Master or Slave • Jumper Setup as Master or Slave (Refer to Instruction shown on CD-RW). • If install One CD-RW at One IDE Cable, setup as Master. If install One CD-RW &...
  • Page 19 3. Installation ④ Connect IDE Cable & Power Cable at the CD-RW IDE2 IDE1 For Rear Panel • When Install Master HDD, please connect at IDE1 Port by Master Cable. • It means, Master Connector which connected with IDE1 Cable must connect with HDD (Master).

  • Page 20: C A M E R A C O N N E C T I O

    3. Installation 2. Camera Connection Connect Camera at BNC Port in Back Side Panel. 3. Monitor Connection Connect Monitor Terminal or S-VHS Terminal to Monitor 4. Computer Connection Connect VGA OUT Terminal to Computer Monitor 5. Network Connection Connect Ethernet Terminal and Network Cable...

  • Page 21: A L A R M / R E L A Y / P T Z C O N N E C T I O

    3. Installation 6. Alarm/Relay/PTZ Connection (4 channel model) ① ② ③ • 4 Channel Model ① ALARM Alarm Input - ‘IN1, IN2, IN3, IN4’ : Connect Sensor Input by Channel ‘GND’ : Connect to Ground ② RELAY Alarm Output – ‘NO, NC’ : Check Alarm Output Type (Normal Open or Normal Close) and connect to ‘NO, NC’...

  • Page 22: F I N I S H I N G I N S T A L L A T I O

    3. Installation 8. Finishing Installation Press any button to Start System after Finishing Installation ※ Hard Disk Format - If New Hard Disk is not Formatted, System can’t recognize the HDD. So it’s same situation as no HDD. Please format HDD when insert new HDD. (Otherwise, System can only operate in Display mode, Menu &...

  • Page 23: Chapter 4. Display

    4. Display 1. System Power ON • Press power button to start system. • After Checking Hard Disk, display mode is shown.1 • Initial Screen View Mode is Quad Division Mode and Recording Mode. <Picture of Power On after Finishing Installation> CAMERA •...

  • Page 24: S C R E E N V I E W S E L E C T I O

    4. Display 2. Screen View Selection • Select One Channel using the channel selection buttons (1-16). • Use the display button to change the multi-channel Display mode. • Press channel selection button twice to view the channel on full screen. 3.

  • Page 25: P T Z / F O C U S C O N T R O

    4. Display 4. PTZ/FOCUS Control • Control Camera Movement of PTZ (Pan/Tilt/Zoom) devices. • Press PTZ Button to switch into PTZ mode. (Status Bar is replaced by PTZ controls) • Each PTZ function is manipulated by using a button on the Front Panel or on the Remote controller. •...

  • Page 26: Chapter 5. Search

    5. Search ⊙ Go to Search Mode • Press [Search] button and Log-In as Administrator or Manager • Use Direction Key to select Menu • To open each Menu by pressing [Enter] button or [Play] Button • Press [Return] button to go back to previous mode. (Move to Previous Menu or Exit Search Mode and Return to Watch Mode) 1.

  • Page 27: S E A R C H B Y E V E N

    5. Search • Control Playing Video ① Basic Playing Mode (Normal Speed 1X Forward Playing) ② Normal Speed Backward Playing ③ Pause Video ④ Fast Forward (2 ~ 64 Speed) ⑤ Fast Backward (2 ~ 64 Speed) ⑥ Same Function as # ④,⑤ ※...
  • Page 28 5. Search • Date : Indicate Event Occurrence Order & Date Time : Indicate Event Occurrence Time Event : Indicate Event Contents & Camera No. • Event Searching Method ① User can Search Event by using Direction key ② Search Event: press Enter at Selected Event from Event Occurrence Time ③...

  • Page 29: Chapter 6. Menu

    6. Menu ⊙ Go to Menu ① Press Menu Button on Front Panel in Watch Mode ② It will ask for Password ③ Input Password Using by Channel Select Button [1][2][3][4] ④ After input Password, press Enter to display Menu •...

  • Page 30: D I S P L A

    6. Menu 1.Display - Video Setup for Watch Mode • Every System Setup can be changed or maintained at Menu (6 kinds Setup) • Move to Menu by using Up, Down, Left & Right button • To Open Detail Menu, press [Enter] button •...
  • Page 31 6. Menu 1-2. MONITOR • Sequence dwell : Set up channel sequence cycle time (1-60 sec). • Spot-out dwell : Setup spot-out time cycle(1~60 sec.). • De-interlace mode : Remove interlacing in high resolution & low frame. * This applies only D1 resolution. (704X480) •...
  • Page 32 6. Menu 1-4. SPOT OUT • Select camera channel for spot out • User can see the selected channel via AV monitor...

  • Page 33: C A M E R

    6. Menu 2.Camera - Setup Camera 2-1. Camera Title • Covert : Setup Covert On/Off *What’s Covert? When Covert On, Display Video is Hidden in Watch mode, but Recording is On. • Title : Setup Camera Name by Virtual keyboard •...
  • Page 34 6. Menu ※ How to use the Virtual Keyboard • Choose character by arrow buttons, and then press [Enter] button. • Press the button for shift then choose the other characters. 2-3. PTZ Setup • PTZ Address : Select PTZ Camera Address •...
  • Page 35 6. Menu 2-4. Motion Sersor • Choose the Partial Motion Region channel by • Move Cursor by Direction Key and Press Enter at channel Selected Region • Sensitivity: 1~10 • Select All : Select Entire Region • Deselect All : Cancel Region Setup •...

  • Page 36: A U D I

    6. Menu 3. Audio - Audio Setup • Live Audio : Audio Output ON/OFF Live Audio Output from Audio In Terminal • Audio Monitoring Channel: Select Channel for Audio Output Nr. 1~4 Audio In • Network Audio TX: Choose the Audio transmission •...
  • Page 37 6. Menu • Time Zone: Choose the time by GMT standard. ※ How to Time setup 1. Setup Time zone as your location. 2. Setup the Network Time server and press the “Sync” button. 3. If correct time is not set automatically, setup the date/time manually. 4.
  • Page 38 6. Menu 4-2. Network • IP Address : Input the unit IP Address. • Gateway : Input the IP address of Internet-connected Router • Subnet Mask : Input the Subnet Mask IP. • DNS Server: Input 1 AND 2 DNS Server IP Addresses. •...
  • Page 39 6. Menu 4-3. Mail These settings allow the DVR to send outgoing E-mail notifications to the list of recipients listed within the DVR • Server: Setup the outgoing Mail server address. • Input the server address using the Virtual Keyboard. •...
  • Page 40 6. Menu 4-4. User Management User setup • It consists of 3 User Groups as Administrator, Manager, User. • Total 7 users for 3 User Groups can be made. • Input User ID, Password. • Choose the Group. • Input the E-mail Address. •...
  • Page 41 6. Menu 4-5. System Information • F/W version: DVR Server firmware version. • H/W version : DVR Hardware version. • Video signal type: NTSC or PAL. • Disk capacity: Used HDD capacity/ total HDD capacity. • IP address: Current IP address of the DVR. •...

  • Page 42: E V E N T / S E N S O

    6. Menu 4-6. Control device (TBK-7008/7016 only) • System ID : Select system ID. (1~254) • Protocol : Select protocol. • Baud rate : Setup baud rate. 5. Event/Sensor 5-1. HDD Event • Drive: HDD connected location • Smart Alarm: On/Off •...
  • Page 43 6. Menu 5-2. Alarm Input • Operation: Setup Alarm Sensor Connection Status (enable/disable) • Type : Setup Alarm Sensor Normal Open, or Normal Close Type 5-3. Alarm Output ※ Setup each channel when alarm, videoloss, motion are happened. • HDD Event: Alarm On/Off when HDD has the problem. •...
  • Page 44 6. Menu 5-4. Buzzer out • Buzzer: On/Off • Duration: Buzzer time (5sec~5min or Until key-in) • Setup each channel when alarm, videoloss, motion are happened. • HDD Event: Buzzer On/Off when HDD event is happened. • Keypad : Setup Key Input Sound. •...

  • Page 45: D I S K M A N A G E M E N

    6. Menu 6. Disk Management • Disk Overwrite : (ON/OFF) overwrite permission (when HDD is full) ON: Overwrite HDD, starting with the oldest data first (also known as FIFO – first in, first out) OFF: When HDD is full, recording will be halted and the system buzzer will activate •...

  • Page 46: G O T O R E C O R D M E N

    6. Menu ⊙ Go to Record Menu 1. Recording Operations • Schedule Mode: Choose the DAILY or WEEKLY. • Pre-Event Recording Time : Setup Pre-Event recording Time. (1~5 sec) • Post-Event Recording Time: Setup Post-Event recording Time. (1~5 sec)

  • Page 47: C O N T I N U O U S / M O T I O N R E C O R D S C H E D U L

    6. Menu 2. Continuous / Motion Record Schedule 2-1. Parameter • Select a block of time from the 0-24hr Timeline (you may select multiple blocks). • Press ENTER again to set up the Resolution, FPS, Quality, and Audio on each channel. 2-2.

  • Page 48: Alarm Recording Schedule

    6. Menu 3. Alarm Recording Schedule 3-1. Parameter • Select a block of time from the 0-24hr timeline (you may select multiple blocks). • Press ENTER again to set up the resolution, FPS, quality, and audio on each channel. 3-2. Schedule •...

  • Page 49: P A N I C S E T U

    6. Menu 4. Panic Setup (TBK-7008/7016 only) • To setup each channel, press enter. • Setup each channel. (Size, FPS, Quality, Audio) • By using panic button of front panel can record urgently as setup.

  • Page 50: G O T O A R C H I V I N

    6. Menu ⊙ Go to Archiving ① ② ③ ⑦ ④ ⑤ ⑥ ① Device : Indicate CD-RW Model and USB MEMORY Model Automatically. If you use the CD-RW and USB memory (or USB HDD) together, it can choose the CD-RW and USB by Up & Down Button. ②...

Table of Contents