Getting To Know Your Cleaner; Using Your Cleaner; Assembling Your Cleaner - Hoover Acubed Silent Extra User Manual

GETTING TO kNOw yOUR ClEANER

A. Main Cleaner
B. Hose
C* Hose handle looped* (For Acubed silent Extra model 62 dba)
C** Hose handle curved**(For Acubed silent model 69 dba)
D. suction Regulator*
E. Telescopic Tube Button**
F. Carry Handle
G. Bag Check Indicator LED
H. On/Off Pedal
I. Cord Reel Pedal
J. LED Display screen*
K. Variable Power Control Button*
K1. Variable Power Control slider*
L. Tool Bracket*
M. Floor type selector*
N. Carpet and Floor Nozzle (GP)**
N1. Carpet Nozzle (CA)**
N2. Hard Floor Nozzle (HF)**
O. Exhausted sponge
P. Exhausted Filter
Q. Bag Door Release Latch
R. Bag Door
s. Pre-motor Filter
T. Bag holder**
U. Bag**
V. Accessory set*
V1. Crevice Tool*
V2. Furniture Nozzle*
V3. Dusting Brush*
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergy Remover Mini Turbo Nozzle*
Y. Parquet Nozzle*
Z. Easy Parquet Nozzle

ASSEMBlING yOUR ClEANER

Remove all components from the packaging.
Connect the hose to the cleaner main body, ensuring it locks into position. [1]
1.
To release the hose: rotate the connector counterclockwise and pull it. [2]
*Certain Models Only ** Certain models only, nozzles may vary according to model
2. Connect the hose handle to the end of the fixed tube upper end and store the
accessories on the tube. [3B]
3. Connect the tube lower end to carpet and floor nozzle. [3A]

USING yOUR ClEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [5]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster
and raise or lower the tube to the most comfortable cleaning position. [4]
3. Select Carpet or Floor Nozzle for ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [6]
5. Adjust the power level by pressing the variable power control button** or by pushing
the variable power control slider**. [7,8]
Adjust the suction regulator* to the desired level. [9]
6.
7. switch off at the end of use by pressing the on/off Pedal. Unplug and extract power
cord again to wind the power cord back into the cleaner.
8. Parking and Storage - The tube can be parked for temporary storage while in use, or
in the storage position when not in use. [10]
ACCESSORIES
To obtain the best performance and energy efficiency
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
2
GB
#1
it is recommended that the