Advertisement
Advertisement
Table of Contents
Related Manuals for Roros Metall 4220
Summary of Contents for Roros Metall 4220
- Page 1 KITCHEN HOOD USER MANUAL 4220...
- Page 2 Sized Technical Figure 1. Power supply Cable 2. Illumination 3. Body 4. Split Extraction Sheet 5. Control Panel 6. Metal Filter 7. Remote Control Cable leading to external motor unit.
-
Page 3: Replacing Lamps
REPLACING LAMPS WARNINGS AND SAFETY MEASURES 3W LED Halogen * This product is designed for home-use. * When cooking fried foods and similar, There are 6 LED halogen lamps in the device. For replacing halogen lamps, push * Operation voltage of the product is 220- make sure that curtains and cloths are downwards from the back part of the lamp holder, and slightly twist it anticlockwise 240 Volt ~ 50Hz. -
Page 4: Maintenance And Cleaning
* Make sure that your children don't * In case of inflammation, turn off the MAINTENANCE AND CLEANING tamper with the device. Don't allow little power of the hood and cooking Attention! kids to tamper with the device. appliances; blanket the fire. Never use Unplug the cable or turn off the switch before all maintenance and cleaning operations. - Page 5 Warnings for Forwarding and Transport Pull the cable coming from external ventilation unit, and drive it 30cm into from the * All materials used in the packaging of this product are recyclable. hole located on the upper side of the hood. * During transport, observe signs and symbols drawn on the product box.
- Page 6 External ventilation units must be used for ceiling model hoods. Before mounting of ceiling hoods, make the connections of previously selected external ventilation system, and prepare the air outlet duct of 150 mm diameter and the part which will be mounted to the ceiling, and fix the plastic chimney to flexi pipe by using a clamp. After installing the hood on the ceiling, pull the plastic chimney and fix it with wing nuts.
Need help?
Do you have a question about the 4220 and is the answer not in the manual?
Questions and answers