Display Features; To Change The Unlock Code (F14) - Audiovox CDM 4500 Owner's Operating Manual

Display Features
MY PHONE F21
NUMBER
(SIDH) 00020
123-456-7890
Phone Lock (F12)
This mode is useful to prevent unauthorized use of the
phone. With this feature on, the following functions are
still available.
.Incoming calls can be answered with CCJ .
.Any Key Answering
.Programmed Emergency Call
.OneTouch Emergency Call
.Turning off the phone by ~ .
The following functions are not available when this fea-
ture is on.
.Automatic Answering
.Quick Dialing
To Activate:
1. Press G tO ~ to
LJ hOne Lock
activate "Phone Lock"
mode.
Note: The phone will remain locked even if the power
is turned off.
Automatic Phone Lock (F13)
If you activate this feature, the phone will automatically
go into the phone lock condition after it is turned off.
(See Phone Lock (F12) above.) When you turn the
phone on, you must enter the four-digit unlock code
before it operates. (See To Unlock the Phone below.)
1. Press G (0 ~ .IAUTO LOCK F13
ON
.v~ ~, l ,
2. You can turn this feature on/off by O or O .
3. Press G to set.
3. You can change the current mode by O or O .
4. Press G to set.
.10SEC- 10 Seconds Mode
Backlight is on for 10 seconds after a key is pressed. It
also lights automatically when the power is turned on
and for an incoming call. The duration is variable be-
tween 5 to 30 seconds, by pressing G .
To Unlock the Phone
1. Enter the four-digit unlock code.
2. The "Phone Lock" indicator will go out.
To Change the Unlock Code (F14)
1 .Press
G .~ ~ .JSECURITY
~ I.:!.::::J CODE:
.OFF- Off Mode
Backlight is on momentarily when the power is first
turned on, but remains off thereafter.
.ALWAYS ON -Always On Mode
Backlight is always on.
Note: You can keep the backlight on while you are en-
gaged in a conversation. See Backlight Con-
trol (In-Use) (F22-2) on page 56.
OK~
~4
55.1
Own Telephone Number Display (F21)
This feature enables you to display your own telephone
number and the ID number (SID) of your "Home" Cellu-
lar System.
Backlight Control (Standby) (F22-1 )
The LCD display and keypad are backlighted automati-
cally after Power-On.
The backlighting duration can be changed. Four modes
are available.