Volume And Tone Controls - Audiovox CDM 4500 Owner's Operating Manual

Volume and Tone Controls
To Mute a Phone Conversation (F34)
You can mute your conversation at any time during a
call.
1. Press G @3 @ .
2. Then the "Mute" indicator is displayed. The transmit
audio will be muted but the
L:=J
ute receive audio will still be
heard from the receiver.
3. To return to normal conversation, press G @:3
~ again.
4. Mute is reset when the call is terminated.
r;;;":1
TMF SEND F3S
[ mi ~
OFF
Sending DTMF (F35)
This feature allows you to activate or deactivate send-
ing DTMF (Touch ToneTM) when you enter a number
during a call.
1. pressG~~.
2. Scroll to "ON~ or "OFF" to
select.
3. Press G to set.
Setting Tones (F36)
This is a group of 9 functions related to the setting of
tones.
1.PressG@3~.
~
36 The Branch Menu is dis- t ~:~ .~
played. ~3:VOICEM~IL
2. Refer to the particular functions for details.
Key Tone Length (F36-1 )
2. You can change the current mode by O or O .
3. Press G to set.
.NORMAL -Normal Mode
Tone is heard as long as the key is being pressed.
I
.SIfORT- Short Mode
Tone Is heard for a short time even if the key remains
pressed.
~8
59j
sired sound level, or "silent" mode.
Note: In "silentn alert mode, alert tone is not given for
an incoming calf. However; if Automatic Answer-
ing feature is ON, alert tone is given with the
lowest available volume.
Ring Type Selection (F32)
This feature permits you to select an alert tone pattern
from 15 options including melody ringers.
1. Press G ~ ~ .IRING F321
ITYPE ---I
desired sound level, or "silent" mode.
Note: Key tone will be off in "silent mode", but tone will
be heard on the other side of the line.
This feature selects the duration of the tone length when
a key is pressed.
1. iPress
G @3~and fKEV TONE F36
1~
I
LENGTH
,lLJ .rv'I~[8]~~r!1. ~
SHORT