Mains Voltage; Mains Connection - Harley Benton hbac-30 Owner's Manual

HBAC-30
Connecting the amp

Mains voltage

Please ensure that your local area's mains power voltage matches the mains
power specification of the mains adaptor as indicated on adaptor's rating label
before you connect the unit to an AC mains power outlet! If in doubt ask a
technician.

Mains connection

Only use the mains adaptor enclosed to connect the unit's DC CHARGER
PLUG on the rear panel to a properly wired IEC power socket.
Now the internal battery will be charged. The charging indicator on the rear
panel lights up in red during charging. To protect the rechargeable battery
you must follow the safety instructions given on page 3!
Alternatively you can operate the unit using a vehicle cigarette lighter (12V= |
) with a suitable adaptor (not supplied). This way of operation will not
charge the internal rechargeable battery.
•
Press on the „ " marking of the POWER switch, to switch the unit on. Press on
the unmarked part of the POWER switch, to switch the unit off.
Connecting instruments and microphones
Application 1
Plug a mic into Input 1 and an instrument such as a guitar into Input 2. Any types
of pickups are suitable. When an effects device is needed, please connect the
device at the INSERT jack, or between the mic/instrument and amp.
Note: Plugging into the INSERT socket does not interrupt the signal. So you
should only connect those kind of effects devices here, that add something to
the signal, e.g. a reverb unit. Those effects devices, that process the signal,
must be switched between mic/instrument and amplifier.
5