Features; Front Controls - Insignia NS-STR514 User Manual

Features

Front controls

# Item
1 ON/STANDBY button
2 STANDBY indicator
3 Bluetooth indicator
4 Remote sensor
5 Display
6 MEMORY button
7 TUNE/PRESET button
Description
Press to turn on your stereo receiver or to put
it in standby mode.
Lights red when your stereo receiver is in
standby mode.
• Blinks when your stereo receiver is in
pairing mode and "PAIRING" is shown on
the display.
• Lights when your stereo receiver is
connected via Bluetooth, and
"CONNECTED" is shown on the display.
Receives the signal from the remote control.
Provides information about the receiver.
Press to save a station preset.
Press and hold to automatically search for
FM stations and store them in memory.
Press to toggle between tune and preset
mode.
www.insigniaproducts.com
Stereo Receiver with Bluetooth
# Item
8 / buttons
9 INPUT button
10 Headphone (PHONES) jack
11 AUX3 jack
12 VOLUME control knob
Description
Does one of the following, depending on the
mode selected:
• In TUNE mode, tunes the receiver up or
down or searches for the next or previous
station. See page 11.
• In MEMO mode, stores stations to the
selected preset number. See page 11.
• In PRESET mode, selects the preset station
you want. See page 12.
• In BLUETOOTH playback mode, skips or
searches forward or back. See page 14.
Press to cycle through the available input
options. Options are in the following order:
FM>AM>CD>AUX 1>AUX 2>AUX 3>BT
(Bluetooth) AUDIO>.
Plug 1/4" stereo headphones into this jack.
Connect a portable audio device, such as an
MP3 player, to this jack.
Turn to increase or decrease the volume.
3