Renault Clio 2003 Owner's Manual page 54

INSTRUMENT PANEL
The presence and operation of the warning and indicator lights described below depend on the car's
equipment and the country.
7 Multifunction display
• Oil level display function
The vehicle must be parked
on level ground and the
engine should have been
switched off for some time to
obtain an accurate
reading.
When ignition
switched on for approximately
30 seconds:
- if the level is satisfactory,
the display indicates oil ok.
To ascertain the level more
accurately, press the trip
mileometer reset button.
The squares which appear
on the display indicate the
level. The number of dots
displayed is reduced as the
oil level drops and they are
replaced by a dash.
- When the level is at a
minimum, the dashes and
the word "oil" flash, and
"OK" is no longer displayed
and the SERV warning light
will come on.
Top up the level as soon as
possible.
(continued)
• Total mileage recorder, trip
mileage and clock.
Can be read approximately
30 seconds after the ignition
is switched on.
level
8 Multifunction key
has been
• Display selection
By pressing the button you
can shift from the total
mileage
mileage
vice-versa.
• Trip mileage reset button
Once the display of the trip
mileage is selected, press the
button and hold it down.
• Setting the clock
Refer to the information on
the clock in Section 1.
9
This lights up together with
one of the warning lights:
recorder, trip
and time or
STOP warning light
It goes out as soon as
the engine starts.
9 Engine immobiliser
system indicator light
This light
several functions. Refer to the
information on the
immobiliser system in Section 1.
SERVICE warning light
This will light up when
the ignition is switched
on and go out after 3 seconds. If
it lights up when the vehicle is
being driven, it is advisable to
stop at a RENAULT Dealer
soon.
It lights up together with one of
the warning lights:
Turning left direction
indicator light
performs
engine
1.47