Table of Contents
Advertisement
User Guide
Outputs Diagnostic
This diagnostic allows for temporary control of each of the outputs of the computer. The
computer controls devices like motors, actuators, pumps, and lights.
A
B
E
C
D
Touching any one of the 8 outputs buttons "A" displayed will turn on or off the corresponding
output. A yellow light indicates that the output is on, whether or not it was turned on by the
operator. Use the left "B" and right "C" arrows to scroll through the 4 screens of outputs.
The battery voltage "D" is displayed to observe how the voltage changes when individual
effectors are turned on and off.
To exit the diagnostic and return to the Diagnostics main screen, touch "Return" "E." When
exiting the diagnostic, all outputs are returned to their normal state. In other words, if the brush
motor was off when entering the diagnostic and the operator turned it on, then it would be turned
off when exiting the diagnostic.
35
Advertisement
Table of Contents
