Table of Contents
Advertisement
User Guide
Parking and Charging
Maneuver the machine to the charging station.
•
Power down by pressing the on/off button on the
•
control panel.
The machine must be placed on a continuous
•
charge for 18 hours for a full charge. Only 24-volt
chargers with a gel cell setting can be used.
These chargers ensure that the batteries do not
overheat. Using any other charger will damage
the machine's batteries.
Exchanging Battery Packs
Set the parking brake.
Position battery exchange cart to receive
battery pack.
Latch the guide ramp into slot
located above rear bumper. Lock the
casters on the Battery Exchange Cart.
Warning: A battery pack weighs 289 pounds. Be
sure that the exchange cart casters are in a
locked position to prevent personal injury.
Press latch to release battery pack.
•
Using the handle, pull the battery pack onto the
•
cart.
Release locking latch and casters.
•
Spin battery Cart 180 degrees, aligning new
•
battery pack.
Engage latching gate and lock casters.
•
Push battery pack into place until handle latch
•
locks.
23
Advertisement
Table of Contents
