Related Manuals for PACOM PAC-C-EB20IRVF-2.8-12-GY
Summary of Contents for PACOM PAC-C-EB20IRVF-2.8-12-GY
-
Page 1: User Manual
PAC-C-EB20IRVF-2.8-12-GY PAC-C-EB20IRVF-2.8-12-WH Vandalproof IR Dome Camera User Manual Issue V1.0... -
Page 2: Model Features
Solution General Specifications To avoid electrical shock, do not open the casing. Refer servicing to qualified personnel only. General ■ NOTE ! Model PAC-C-EB20IRVF-2.8-12-GY PAC-C-EB20IRVF-2.8-12-WH Before Use IR LED 15 pcs IR LED(distance = 15m) Resolution 1. Do not lift the camera by only holding the cables. -
Page 3: Osd Menu Function
Introduction Push UP for 5 seconds The camera will output with the Analog signal Schematic of the System Push DOWN for 5 seconds The camera will output with the HD-CVI signal Push LEFT for 5 seconds The camera will output with the HD-AHD signal Push RIGHT for 5 seconds The camera will output with the HD-TVI signal BNC Output... -
Page 4: Backlight Compensation
（1）Electronic Shutter:User can set both slow and high-speed shutter.( The speed can be set as auto, from 1 / 25 ~ 1 / 500000, FLKX2~X30. The user ， can set the specific speed according to the specific surroundings. The default value is auto. -
Page 5: White Balance
Switch to Hight/Middle/Low and OFF to enable or disable noise reduction on dynamic recordings. White Balance Is used to restore the authenticity of the color affected by the change of color temperature. White balance options include: Manual/AWB/ATW/AWC/Indoor/Outdoor. Special Day&Night The Day & Night Switch is specifically designed for different surroundings. There are 3 kinds of modes as follows: EXT mode, Auto mode, Color mode, B/W mode (1)D&N EXT... - Page 6 ( 3 )Motion:Select motion areas,Display,Sensitivity,Color,Trans,Alarm. 1.Sharpness:Auto/Off. 2.Monitor:LCD/CRT. 3.LSC:Off/On. 4.Video.Out:PAL/NTSC 5.Return Exit When all settings are complete, press "Up", "Down" to move the cursor to "Exit", select "Save&End "(save the changes of parameters and then exit the menu) or "Reset" ( recovers factory settings ) or "Not Saved"(Doesn't save the settings and exits the menu).
-
Page 7: Mechanical Drawing
Installation Mechanical Drawing Installation Information (General Overview Open package, take out the camera, unscrew the camera compression ring, Accessories and disassemble the camera. Drill mounting holes on the ceiling or wall, using the camera mounting base Wall Mount Bracket Universal Junction Box(Options) as a template. -
Page 8: Trouble And Solution
NOTES Trouble and Solution 1.No picture after connecting the camera? Please check the power supply to ensure power is connected. Also check that all associated connections e.g connection to the monitor are firmly pushed in. Picture distortion. Eliminate interference by possibly filtering the power supply.
Need help?
Do you have a question about the PAC-C-EB20IRVF-2.8-12-GY and is the answer not in the manual?
Questions and answers