D-Link DWL-P200 Quick Installation Manual page 3

Connecting The DWL-P200
Always pair a Base unit with a Terminal unit. DO NOT connect two
Base units together, or two Terminal units together.
Insert one end of a Cat 5 Ethernet RJ-45 cable into the "LAN IN" port of the
Base Unit. Connect the other end of the cable to your network switch or PC.
Do Not mistake the "LAN IN" port with the "P + DATA OUT" port.
Incorrectly plugging the wrong Ethernet cable into the wrong Ethernet port
may cause serious damage to your network devices. D-Link will not replace
or repair products or reimburse customers for devices that become damaged
due to incorrect installation, nor is liable for any loss of business resulting in
the incorrect installation of this product.
Plug one end of the Power Adapter into the "DC 48V IN" Base Unit and
the other end into your electrical outlet. The green "PWR" LED on the
Base Unit should light up.
3