VDO PC 5200 Quick Operating Manual page 21

CONTENTS
General settings
The following options are available in the
"General settings" menu:
■
Language
Selection of the language for menus and
voice information.
✎
The language for menus can be set in-
dependently of the language for navi-
gation instructions.
✎
An SD card with the corresponding lan-
guage files is needed for loading a lan-
guage other than the two language
files displayed.
The language files can be transferred
from the supplied DVD-ROM to an SD
card using the PC Copy Tool.
■
Audible settings.
Settings for the audible guidance messages:
❑ SDVC: Adjustment for speed-dependent
volume increase.
❑ Volume: Setting of the volume of the
guidance messages.
❑ Voice on/off: Activates/deactivates the
audible guidance messages.
■
Measuring units
Setting of time and date format, measuring
units for distance specifications and adjust-
ment of the current time zone.
OPERATION
■
Device configuration
Connection settings which have to be carried
out once when the system is installed and/or
in the case of subsequent system upgrades.
■
Shut-down timer
Setting of the after-running time for the
navigation computer (sensible e.g. for short
intermediate stops).
System information
The following options are available in the
"System information" menu:
❑ Diagnosis: Code-protected menu for in-
stallation and service purposes.
❑ Default settings: Resets the user-specific
settings to the factory values.
❑ Configuration: Display of unit identifica-
tion and hardware and software versions.
❑ Speed correction: The navigation system
uses an average cruising speed to calcu-
late the remaining travel time and the
estimated time of arrival. If required,
you can adapt this speed to your actual
average speed. However, we do not rec-
ommend you deviate significantly from
the standard value of 100 %.
SETUP
Info points
Selection and activation/deactivation of the
messages concerning info points (e.g. tourist
attractions, petrol stations, etc.).
INSTALLATION
23