Programming The Lock - INSYS EloStar time User Manual

EloStar time
Handbuch

3. Programming the lock

In order for the lock to be programmed, it has to be opened. For this purpose, the
lock can be opened with any user code.
In the delivery state, the lock can only be opened with the factory master code
(0 = user no. + 1 2 3 4 5 6 = master code,
The most important functions of the lock can be programmed with the keypad;
extended functions are programmed with the PC software CombiComm and the
event log is read out with the PC software.
Programming with the keypad
Program number
0
1
2
3
4
5
6
7
8
9
Version 1.03
0 123456
Function
Reprogram the master code
Program/reprogram/delete user codes
Activate the 4-eyes principle
Set the opening delay / release time
Set automatic locking after 10 sec.
Reset lock
Block / release lock
Start programming via PC
Set date and time
Set IO functions / set blocking element
).
5