Humanware Prodigi User Manual page 43

Refer all servicing of this product to qualified service personnel. Do
not attempt to service it yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks.
Susceptibility to Interference:
There may be temporary degradation of the image when Prodigi is
subjected to a strong radio-frequency field, electro-static discharge
or transient electrical noise. An electro-static discharge (caused by
static electricity) may cause the screen to go blank. If this happens,
power the system off and on again.
Warning RF Exposure Compliance:
The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any
other antenna or transmitter. Users and installers must be provided
with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
FCC / Industry Canada Two Part Statement:
This device complies with FCC Part 15 and Industry Canada
license exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device.
Page 41