Multi-Capture (Standard Interface) - Humanware Prodigi User Manual

Note: On the Standard interface, you can lock the camera's
autofocus if necessary by doing a double tap gesture. You can also
lock the Autofocus and disable the touchpad from the Settings. See
chapter 3 (section Manual Tasks) to learn how.

MULTI-CAPTURE (STANDARD INTERFACE)

If you wish to capture and save a multipage document:
 Toggle to Multi-Capture mode by swiping on the left edge of
the touchpad:
 Place your first page on the base plate and press Read to
capture it. Proceed in the same way for each page you wish
to capture. Your multipage document will be saved in the
Gallery.
 Press Back to end Multi-Capture and access your document.
Swipe left or right to select a page, and tap to open the page
and spot read with Prodigi's locator.
 To read your document, select a page you wish to start
reading from and press Read. Prodigi will read your entire
document and announce when it reaches the end of your
document. A sound will indicate when a new page is being
read.
 Press Back to return to the page placement frame, and Back
again to return to the carousel menu.
Page 23