Secura Key Radio Key 600 Operating & Installation Manual page 9

Radio Key
®
Add a PIN to the System:
Enter Password. Press ENTER. Press ADD. Enter the User Number
and press ADD, enter the 4-digit PIN code, then press ENTER.
+ 1
(ADD)
(User Number 14)
Note: A PIN must be 4 digits. If the PIN has leading zeros, they must be
entered as this example shows - "0004".
Delete a Transponder or PIN from the System:
Enter Password. Press ENTER. Press VOID. Enter the User Number. Press
ENTER. A green light and beep means that the Transponder or PIN was deleted.
+ 1
(User Number 12)
(VOID)
Delete a Range of Transponders/PINs from System:
Enter Password. Press ENTER. Press VOID. Enter the Starting User
Number in the range, press
ENTER. A green light and beep means that the range of Transponders/
PINs was deleted.
+ 1
(Starting User No. 1)
(VOID)
Delete a Transponder by Presenting to Reader:
Enter Password.
Transponder near the RK600 Unit. A green light and beep means that the
Transponder was deleted.
+
(VOID) (ENTER)
Delete a Transponder by Entering Transponder ID:
Enter Password. Press ENTER. Press VOID, press
printed on the Transponder, then press ENTER. A green light and beep
means that the transponder was deleted.
*
+
(VOID)
600
+ 4 +
+ 2 +
*
*
+ + 1
(Ending User Number 10)
Press ENTER. Press VOID, then press ENTER. Hold the
(Hold Key Tag near Unit)
+ 9 + 9
(ID Number 995)
Secura Key  5
Operating & Installation
+ 3 + 2
(PIN Code 3253)
(ENTER)
, enter the Ending User Number, then press
+ 0 +
+ 5 +
+ 5 + 3 +
(ENTER)
*
, enter the ID number
(ENTER)
(ENTER)