Advertisement
Mount the
Wall Bracket
PetChatz
®
cannot guarantee unit and pet safety if these
installation instructions are not followed.
9
Once the wood screws are in
place, secure the drywall screw
into the drywall anchor.
10
i
If the mounting
bracket does not
fit over the wall
plate, please
review page 22.
Finishing Up
Figure A
PLUG THE PETCHATZ
ELECTRICAL OUTLET
• Plug the USB power supply plug into the back
Figure B
of your PetChatz unit. Note: Your PetChatz
system includes a USB type B connector and
port (see Figure A). Insert the type B cord into
the type B port.
• Plug the USB power supply plug into your wall's
electrical outlet.
ATTACH PETCHATZ UNIT TO YOUR
MOUNTING BRACKET
Figure C
• Using the three (3) mounting bracket screws,
re-attach the PetChatz unit to your mounting
wall bracket using a Phillips screwdriver. (as
shown in Figure B).
TURN ON THE PETCHATZ UNIT
• Reconnect power to the electrical outlet at the
main fuse box.
• Turn on the power switch on the bottom front
right side of the unit (Figure C). The PetChatz
logo will display briefly on the screen. Note:
It may take a few moments to power up.
• UNIT LIGHTS
o Green light to the left of Manual Treat
Dispense button – Power on LED.
o Amber light to the right of Manual Treat
Dispense button – Low Treat LED.
UNIT INTO YOUR
®
11
Advertisement
