Transportation And Storage; Preparing For Transport And Storage; Long Term Storage - Baumr-AG FUJI-MICRO F5200Ri User Manual

Fuel-Injected Petrol Powered Inverter Generators

Transportation and Storage

other ignition sources. • Always transport the machine with the fuel tap and engine ON/OFF switch in the
"OFF" position. • Drain the fuel tank before transportation or storage.

Preparing for Transport and Storage

•
Drain the fuel system by allowing the engine to run until it stops.
•
Ensure the fuel tap, engine ON/OFF switch and fuel cap vent are in the "OFF" position.
•
Avoid exposing the equipment to direct sunlight, particularly during transportation.
•
Ensure the equipment is secure the upright during transport.
•
Store the unit in a dry, well-ventilated area and out of the reach of children.

Long Term Storage

Follow the normal procedures for storage, then:
•
Remove the spark plug and put 30ml of clean engine oil into the cylinder. Pull the starter rope slowly to
distribute the oil. Re-install the spark plug.
•
Cover the equipment to protect it from dirt and dust.
Always ensure that the machine is cool enough to touch before transporting or
storing. • Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or
19