Table of Contents
Advertisement
ActiveSync Connection
ActiveSync Connection
2. ActiveSync Safety Information
4) When failed in connection continuously and "unknown hardware" icons pop up on the PC tray.
a. It may be resulted from the error of USB host in the PC.
b. Then, remove the terminal from the cradle, reboot the PC, and then connect the terminal to the
5) When turning off and then on the main battery, the terminal will not operate.
To prevent this problem occurred, you shall press 'POWER' button of the terminal before removing
If the terminal does not operate properly after turning off the battery unavoidably, press "#" and
But, this time all the data stored on the current Memory will be lost unless made a backup in other
BIP-5000
cradle.
the main battery. Otherwise, pressing 'EXIT' menu of Start Menu using the stylus pen to
perform 'System Shutdown' of Windows CE.
"Enter" button simultaneously and press and then release 'Reset' button at the rear.
device.
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < # >
Advertisement
Table of Contents
