Advertisement
Quick Links
Pidion BIP-5000 Handheld
Configuration Manual
Overview
Introduction
Pidion BM170 Configuration
This document includes configuration information related to features
available with the purchase of the Pidion BIP-5000 handheld and its
expansion modules. This will also reference the BIP-5000 User Manual.
Model Variations (All with 824 Mhz Processor, 128Mb RAM, and Windows
Mobile 6.1 Pro):
•
MG-1: Bluetooth, IrDA, WiFi, 1D Scanner, Camera, GPS
•
MG-2: GPRS, Bluetooth, IrDA, WiFi, 1D Scanner, Camera,
GPS
•
MG-4: GPRS, Bluetooth, IrDA, WiFi, 1D Scanner, GPS
•
MG-6: GPRS, Bluetooth, IrDA, WiFi, Camera, GPS
Use this document for help on the following options:
•
Installing the Route Manager Shortcut
•
Resetting the Device
•
Wireless GPRS connection
•
GPS Configuration
•
BarCode Scanning Setup
If you are not sure which features are available with your handheld, please
contact your reseller or ARS.
1
Advertisement
Related Manuals for Pidion BIP-5000
Summary of Contents for Pidion BIP-5000
- Page 1 Overview This document includes configuration information related to features available with the purchase of the Pidion BIP-5000 handheld and its expansion modules. This will also reference the BIP-5000 User Manual. Model Variations (All with 824 Mhz Processor, 128Mb RAM, and Windows Mobile 6.1 Pro):...
-
Page 2: Resetting The Device
A “Hard” reset (restores handheld to factory specs, removes all software installed, settings, etc) can be performed by pressing the “Reset” button along with the “telephone” button on the keyboard at the same time. Hold down the telephone button until the Pidion boot screen shows. Pidion BM170 Configuration... - Page 3 ARS. Follow the steps below to successfully configure your handheld for GPRS transfer. 1. On the handheld, navigate to Settings > Connections and tap on Connections. 2. Tap Add a new modem connection. Pidion BM170 Configuration...
- Page 4 Pidion BM170 Configuration...
- Page 5 3. Select Cellular Line (GPRS) and tap Next. NOTE: Enter a unique name for the connection, if desired. 4. In the Access point name field, enter: wap.cingular (case sensitive). Pidion BM170 Configuration...
- Page 6 6. Confirm it is ready by confirming WiFi is disabled, then launching Internet Explorer and opening a website (such as msn.com). GPS Logging The Pidion BIP-5000 handheld also has the capability of capturing GPS Coordinates (by stop) or logging the drivers GPS coordinates throughout the day (for review later).
- Page 7 Select the Hardware option on the bottom of the screen. Input COM8 and 19200: These settings will need to be matched in the Handheld Class settings located in Route Manager: Pidion BM170 Configuration...
- Page 8 Scanner is set to be used as a “Keyboard Wedge” style scanner. This is checked by: 1. Go to Start > Settings > System Tab > and click on the “BarCodeSetting” program. 2. Choose the the [+] button next to “Output” Pidion BM170 Configuration...
- Page 9 3. Then select the “OutPut: <Clipboard> option, and choose the “KeyMsg” option at the bottom of the screen: 4. Next, select the “Apply” button at the bottom of the screen to save the changes. 5. Select YES to the apply changes prompt: Pidion BM170 Configuration...
- Page 10 6. Choose OK on the confirmation prompt: 7. Select the OK button in the upper right corner to close the BarCode Settings program and complete the setup process: Pidion BM170 Configuration...
-
Page 11: Testing The Scanner
1. Click on the Start Menu > Programs and choose the program for “Notes”: 2. Choose the “New” option on the bottom left of the screen: 3. This will then launch us into a blank note entry screen: Pidion BM170 Configuration... - Page 12 Note: This will tell us the actual BarCode read by the handheld. 5. Once completed, you can choose the “OK” buttons on the top right of the screen to close out of the Notes program. Pidion BM170 Configuration...
- Page 13 The BarCode scanned in Step 4 above needs to be input in your Route Manager settings for each product on the Handheld tab, in List > Products > Product Charge Codes, within the “Product UPC Code” field. Pidion BM170 Configuration...
Need help?
Do you have a question about the BIP-5000 and is the answer not in the manual?
Questions and answers