Marmitek WD861 Proguard 800 Series User Manual page 5

TECHNICAL DATA
Antenna:
Frequency:
Power:
Current Consumption:
RFI Immunity:
Cable Length:
Operating Temperature:
Dimensions:
Specifications may be modified without prior notice.
Note: The WD861 is supplied with the Factory Setting jumper in the "F"
position. Do not change the configuration of this jumper.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol
on the product and/or its packaging must not be disposed of with unsorted
municipal waste. The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via designated
collection facilities appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old equipment, please contact
your local authorities, waste disposal service, or the shop where you purchased the product.
5
Built-in Internal Whip
868.35MHz FM
3.6V ½ AA Lithium Battery
25mA (transmission), 10µA (standby)
40V/m
2.4m
0-60°C
65 x 30 x 25mm (Transmitter)
© MARMITEK