Related Manuals for Sound Skulptor stereo tape simulator
Summary of Contents for Sound Skulptor stereo tape simulator
-
Page 1: User Manual
Stereo Tape Simulator www.soundskulptor.com Stereo Tape Simulator User manual Copyright 2010 Sound Skulptor Page 1... - Page 2 Stereo Tape Simulator www.soundskulptor.com Introduction Thank you for purchasing the Stereo Tape Simulator (STS). We hope that this tool will enrich your work technically and artistically. Please note the security warnings below before you use this product. Security Like all electrical devices that are mains powered, the STS case must not be opened by an unqualified person.
- Page 3 Stereo Tape Simulator www.soundskulptor.com The power adapter must be able to supply a voltage between 9 and 18 Volts with a power of 10 Watts. Input – Output : The input/output cables are XLR to be connected on the back of the STS. The connexion is standard: 1 = GND, 2 = Hot, 3 = Cold.
- Page 4 Stereo Tape Simulator www.soundskulptor.com In use The STS has several simultaneous effects on the sound. Some distortion is produced at low frequencies by the magnetic material. It is mostly third harmonic and it has the effect of reinforcing the low end perception. It is present at fairly low levels and increases with signal amplitude.
Need help?
Do you have a question about the stereo tape simulator and is the answer not in the manual?
Questions and answers