Generalscan GS-M100BT Quick Start Manual page 9

Charging:
Before using the Generalscan Bluetooth ring barcode
companion which include GS-R1000BT,GS-R1001BT,GS-
R1500BT for the first time, please charge the battery using
micro-USB cable until the red charging LEDs light is off.
You can plug the USB-A cable into any PC USB port or
Android smartphone charging adapter with 5V DC output.
Model GS-R1000BT
Interface Micro-USB
Charging Voltage DC-5V 0.3A
Battery Volume 350maH
Charging Time 3-5 hour
Working Time(10s
interval trigger with 12 hour
good decode)
GS-R1001BT GS-R1500BT
Micro-USB Micro-USB
DC-5V 0.3A DC-5V 0.5A
350maH 350maH
3-5 hour 3-5 hour
12 hour 8hour
Scanning Techniques
Please aim at the middle of the barcode through the
red light when scan the barcode.
Please scan properly in accordance with the following
diagram,adjust the scanner angle and distance slowly ,at
the same time ,press the trigger button ,make the centre
red light cover the left to right of the barcode .
Do not use the second image to scan barcode .
16 17