24-4.Bluetooth Pairing Guide
When you want to pairing with iOS and have two way
communication at the same time , you should use the
scanner with Bluetooth 4.0 .
It similar with SPP mode but it is free and no need pass
the MFI certification .
Please scan the following Bluetooth BLE mode barcode
and search it in iOS device.
We re c o m m e n d y o u u s e S P P m o d e f o r t w o w a y
communcation in Android,the compatibility is better than
BLE in Android platform.
Bluetooth BLE Mode
Note:with Bluetooth BLE mode ,the blue LED will not blink
in fast .
Note:Apply for all bluetooth barcode scanner with BLE
24-5.Bluetooth Pairing Guide
When you connect with Android and iOS device ,please
scan the Enter Pairing Mode barcode first .You will see
the blue LED will blink after scan Enter Pairing Mode
barcode, then search device in Android and iOS setting
interface,The name of GS-M serial bluetooth barcode will
display as "GS-BarcodeScanner"
Bluetooth Pairing Mode
After you pairing successfuly ,the blue LED will stop blink.
The detail pairing procedure for Android ,iOS ,WP8 ,please
reference the following video:
http://www.generalscan.com/en-us/video-en.php
Note:Apply for all bluetooth barcode scanner
60
61