Engine Oil Dipstick - 1.0L Ecoboost; Engine Oil Dipstick - 2.0L; Engine Oil Check - Ford FOCUS 2017 Owner's Manual

Hide thumbs Also See for FOCUS 2017:
Table of Contents

Advertisement

ENGINE OIL DIPSTICK - 1.0L
ECOBOOST
A
E141337
A
Minimum.
B
Maximum.

ENGINE OIL DIPSTICK - 2.0L

A
B
E191425
A
Minimum.
B
Maximum.

ENGINE OIL CHECK

WARNING
Do not work on a hot engine.
To check the engine oil level consistently
and accurately, do the following:
1.
Make sure the parking brake is on. Make
sure the transmission is in park (P) or
neutral (N).
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Maintenance
B
2. Run the engine until it reaches normal
operating temperature.
3. Make sure that your vehicle is on level
ground.
4. Switch the engine off and wait 15
minutes for the oil to drain into the oil
pan. Checking the engine oil level too
soon after you switch the engine off
may result in an inaccurate reading.
5. Open the hood. See Opening and
Closing the Hood (page 212).
6. Remove the dipstick and wipe it with
a clean, lint-free cloth. See Under
Hood Overview (page 214).
7.
Replace the dipstick and remove it
again to check the oil level. See
Engine Oil Dipstick (page 216).
8. Make sure that the oil level is between
the maximum and minimum marks. If
the oil level is at the minimum mark,
add oil immediately. See Capacities
and Specifications (page 275).
9. If the oil level is correct, replace the
dipstick and make sure it is fully seated.
Note: Do not remove the dipstick when the
engine is running.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
Note: The oil consumption of new engines
reaches its normal level after approximately
3,000 mi (5,000 km).
Adding Engine Oil
WARNINGS
Do not add engine oil when the
engine is hot. Hot engine oil can burn
you badly.
Do not remove the filler cap when
the engine is running.
216

Advertisement

Table of Contents
loading

Table of Contents