LDK 5481 + LDK 4700 User's Guide | LDK 4700 base unit
3.6.6 Teleprompter input connector
Figure 3-12. Teleprompter input connector
BNC connector: panel view
3.6.7 Y, Pr, Pb output connectors
Figure 3-13. Y, Pr, Pb output connectors
BNC connector: panel view
3.6.8 SDI Camera connectors
Figure 3-14. SDI Camera connectors
BNC connector: panel view
v4.0
Apply a 1Vpp, 75 Ohm teleprompter video signal to this
BNC socket for viewing on the camera VF output. (The
signal output on the camera VF or CVBS output is
selected in the camera menu system.)
These BNC sockets provides 1 Vpp Y, Pr and Pb
component video output signals from the camera.
These outputs can set to R, G and B with the rocker
switch number 2 on the rear of the unit. Off is Y, Pr and
Pb; On is R, G and B
1 2 3 4 5 6
Side view of switches
1.
SDI (camera to base unit)
2.
SDI (base unit to camera)
On
Off
3-15