Compatibility; Controls; Powering The Camera - THOMSON LDK 5481 User Manual

LDK 5481 + LDK 4700 User's Guide | LDK 5481 DigiLink Adapter

2.3 Compatibility

Before using the LDK 5481 DigiLink adapter you must ensure that it is compatible with your
camera head. Camera heads with software version v13.0 and higher are fully compatible and
do not need to be upgraded. Camera heads with software below this version must be
updated.
Older camera heads with data board no. 3922 406 84271 or LDK 100 cameras built before
2001 need to be upgraded. For more information on upgrading your camera contact your Grass
Valley service representative.

2.4 Controls

Figure 2-2. LDK 5481 adapter controls
2
1
1. Power source selection switch
2. Power on indicator (green)
3. Tally indicators (red)
4. Circuit breaker button (FUSE)

2.4.1 Powering the camera

The power supply for the camera and the adapter (+12 Vdc) is normally supplied either via
the multicore connector or via the DC IN socket. Set the power source selection switch (1) to
the position that corresponds to your chosen method:
• LOC: Powered via DC IN socket
• REM:Powered via multicore
The power on indicator (2) lights when power is supplied and the camera power switch is On.
v4.0
DC out LCP CVBS VF
3
4
2-5