Controls And Indicators; Powering The Base Unit; Indicators; Set-Up Items - THOMSON LDK 5481 User Manual

LDK 5481 + LDK 4700 User's Guide | LDK 4700 base unit

3.4 Controls and indicators

Figure 3-1. DigiLink base unit controls

3.4.1 Powering the base unit

Set the power switch to the on position (I). The power on indicator in the switch lights when
the unit is powered.

3.4.2 Indicators

Table 3-2. Ready indicator
indication
off
green (OK)
flashing yellow
flashing yellow/green
Table 3-3. On-Air indicator
indication
On
Off

3.4.3 Set-up items

There are five items that can be accessed via the set-up buttons:
• Camera number (CA)
• Subcarrier adjustment (SC)
• H-phase (HP)
• Status (ST)
• Menu Off (OF)
v4.0
Ready
Display indicator
Ready On-air
Set-up
On-air
buttons
indicator
description
no camera video signal detected.
camera video signal detected.
no camera video signal detected and power failure or fan
failure.
camera video signal detected and power failure or fan
failure.
description
The camera is on air.
The camera is not on air.
LDK 4700
DigiLinK - BASE UNIT
Mains
Power switch
and indicator
3-9